HPT
HYDROSTATIC PRESSURE TESTING UNITS
- Test Pressures upto 2700 Bar
- Explosion Proof
- Compact Design & Portable
- Gauges With Maximum Pointer
Whenever there is a need for pressure testing, in-plant or on-site, of any fluid component, piping, tank, etc., We have the solution.
The above standardised pressure testing units, which are built on aluminium profile frames, were designed with a focus on simple oreration, portability and cost efficiency.
All system components being used are of highest possible quality and performance with wide safety margins, providing long trouble free use.
The Test Units can be used for pressure testing, from very low pressures up to 2700 bar. Higher pressure is available upon request. The only requirements are, compressed air supply to drive the pump and water supply, as test media. Water emulsion or hydraulic oil can also be used.
The standard units, listed below, cover a very wide range of applications. However, should a different flow or pressure configuration be required we are always prepared to build customised units to meet your specifications.
|
SPECIFICATION |
HPT 35-2 |
HPT 111 |
HPT 189 |
HPT 300 |
HPT 400 |
|
Test Pressure at
7 bar air drive pressure |
540 Bar |
700 Bar |
1500 Bar |
2000 Bar |
2700 Bar |
|
Pressure Ratio |
1 : 80 |
1 : 130 |
1 : 220 |
1 : 314 |
1 : 398 |
|
Flow at an air drive of
6 bar and 0-pressure |
4.30 L/Min |
0.48 L/Min |
0.28 L/Min |
0.65 L/Min |
0.51 L/Min |
|
Pressure Gauge |
0 - 700Bar
Ø 100 mm |
0 - 1000 Bar
Ø 100 mm |
0 - 2000 Bar
Ø 100 mm |
0 - 2500 Bar
Ø 100 mm |
0 - 4000 Bar
Ø 160 mm |
|
Air Inlet Port |
1/2" BSP |
1/4" BSP |
1/4" BSP |
1/2" BSP |
1/2" BSP |
|
Suction Inlet Port |
3/4" BSP |
3/8" BSP |
3/8" BSP |
1/2" BSP |
1/2" BSP |
|
Pressure Outlet Port |
3/8" NPT |
3/8" NPT |
M16 x 1.5
for 1/4 o.d.pipe |
M16 x 1.5
for 1/4 o.d.pipe |
M16 x 1.5
for 1/4 o.d.pipe |
|
Dimensions (mm) |
400 x 400 x 480 |
450 x 300 x 210 |
450 x 300 x 210 |
400 x 400 x 350 |
400 x 400 x 380 |
|
Weight (kg) |
30.0 |
7.5 |
7.5 |
23.0 |
25.0 |
OPTIONS
- Other flow and pressure configurations.
- Aluminium tanks or stainless steel tanks (standard units are without tanks).
- Multiple pressure outlets with or without valves.
HPT Brochure